2024 Moscow International Communication Exhibition, Russia


2024 Moscow International Communication Exhibition, Russia Exhibition time: April 23-26, 2024 Booth number: 22D60


Top 3 Causes of Micro RF Coaxial Connectors Failure


There are many types of Micro RF Coaxial Connectors, so in the process of connection, the same will also produce many detailed problems, this article will focus on the failure of the components of the coaxial connector, to talk about the reasons.


Introduction to the role and type of N RF Fixed Attenuator


N RF Fixed Attenuator is a fundamental component of RF and microwave circuits and systems. Often found in almost all RF applications, the N RF Fixed Attenuator plays a key role in receivers, transmitters, and test and measurement systems.The primary role of the N RF Fixed Attenuator is to reduce the signal strength before sensitive circuit elements. Attenuators can be manufactured using a variety of techniques, and understanding the available options for attenuators can help engineers select the most appropriate attenuator for their application.


Introduction to the main specifications, electrical properties, and mechanical properties of UHF RF Connectors


The naming of UHF RF Connectors consists of two parts: the nominal designator and the structural designator, separated by a short horizontal line "-". The primary designator of RF Connectors adopts the international common primary designator, and the naming of different structural forms of specific products is specified by the detailed specification, and the structural form represents the structure of RF Connectors.


The role and principle of N RF Fixed Attenuator


N RF Fixed Attenuator is an electronic component that provides attenuation and is widely used in electronic equipment, its main uses are


Analysis of the causes of failure of Micro RF Coaxial Connectors and solutions


Each Micro RF Coaxial Connectors has a rated life cycle, the inner conductor of the connector is smaller in size compared to the outer conductor, and the poorer strength of the inner conductor is more likely to cause poor contact and cause Micro RF Coaxial Connectors to fail.


< 1234...18 >
TRL

Have Any Questions !

DON'T HESITATE TO CONTACT US ANY TIME.